MIL-STD-810 MIL-STD-810, Environmental Engineering Considerations and Laboratory Tests Chambers

MIL-STD-810 MIL-STD-810 Environmental Engineering Considerations and Laboratory Tests Chambers

Retrofitmach offers suitable test chambers for MIL-STD-810G/H test standard requirements.

MIL 810 G/H test standards determines equipment's environmental design and test limits to the conditions that it will experience throughout its service life, and establishing chamber test methods that simulate the effects of environments on the equipment rather than imitating the environments themselves. Although prepared specifically for military applications, the standard is often used for commercial products as well.

MIL-STD-810 Test Procedures are below:

• Define environmental stress sequences, durations and levels of equipment life cycles according to MIL-STD-810 ;
• Develop analysis and test criteria tailored to the material and its environmental life cycle according to MIL-STD-810;
• Evaluate material performance when exposed to a life cycle of environmental stresses  according to MIL-STD-810;
• Identify deficiencies, shortcomings and defects in the material design, materials, manufacturing processes, packaging techniques and maintenance methods according to MIL-STD-810
• Demonstrate compliance with contractual requirements according to MIL-STD-810

Testing Methods of MIL-STD-810

MIL-STD-810 Method 500.5 Altitude Test

MIL-STD-810 Method 501.5 High Temperature Test

MIL-STD-810 Method 502.5 Low Temperature Test

MIL-STD-810 Method 507.5 Humidity Test

MIL-STD-810 Method 503.5 Temperature Shock Test

MIL-STD-810 Method 505.5 Solar Radiation Test

MIL-STD-810 Method 506.5 Rain Test

MIL-STD-810 Method 508.6 Fungus Test

MIL-STD-810 Method 509.5 Salt Fog Testing Test

MIL-STD-810 Method 510.5 Sand and Dust Testing Test

MIL-STD-810 Method 511.4 Explosive Atmosphere Test

MIL-STD-810 Method 512.5 Immersion Test

MIL-STD-810 Method 513.6 Acceleration Test

MIL-STD-810 Method 514.6 Vibration Test

MIL-STD-810 Method 516.6 Shock Test

MIL-STD-810 Method 521.2 Icing, Freezing Rain Test